HELO CPUI L1CI PLLI PMCB HELO CPUI L1CI 4.1605xponpatch2-12.2.21-118.5 DRAM ---- PHYS ZQDN PHYE DINT TST1 TST2 PASS ---- ZBSS L12F MAIN FPS0 S004 B004 0001 S005 B005 0257 NAN3 RFS2 NAN5 Base: 4.16_05xponpatch2 CFE version 12.2.21-118.5 for BCM96838 (32bit,SP,BE) Build Date: Tue May 9 13:42:05 CDT 2017 (swbuild@min-premcov) Copyright (C) 2000-2015 Broadcom Corporation. Boot Strap Register: 0x800078ff Chip ID: BCM68385C_B0, MIPS: 240MHz, DDR: 333MHz, Bus: 240MHz RDP: 600MHz Main Thread: TP0 Total Memory: 268435456 bytes (256MB) Boot Address: 0xbfc00000 NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes NAND flash device: MXIC MX30LF1G18AC, id 0xc2f1 block 128KB size 131072KB Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host/tftp (f/h/c) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Boot image (0=latest, 1=previous) : 0 Default host ramdisk file name : Default ramdisk store address : Board Id (0-15) : 803GP Number of MAC Addresses (1-32) : 3 Base MAC Address : 44:65:7f:81:xx:xx PSI Size (1-128) KBytes : 64 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Auxillary File System Size Percent: 0 Main Thread Number [0|1] : 0 GPON Serial Number : "CXNK0065xxxx" GPON Password : " " MC memory allocation (MB) : 4 TM memory allocation (MB) : 20 DHD 0 memory allocation (MB) : 0 DHD 1 memory allocation (MB) : 0 DHD 2 memory allocation (MB) : 0 WLan Feature : 0x00 Voice Board Configuration (0-2) : LE9540 Partition 1 Size (MB) : 0M Partition 2 Size (MB) : 0M Partition 3 Size (MB) : 0M Partition 4 Size (MB) (Data) : 0M enable IH Wan-Wan forwarding... data_path_go Done!! Creating CPU ring for queue number 0 with 32 packets descriptor=0x80a7f728 Done initializing Ring 0 Base=0xa2615240K End=0xa2615440K calculated entries= 32 RDD Base=0x02615240K descriptor=0x80a7f728 Open PHY 1 on MAC 0 : link state = Down *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 111 CFE> web info: Waiting for connection on socket 0. CFE> ? Invalid command: "?" Available commands: x, find, comp, fb, dn, phy, sm, dm, db, dh, dw, w, e, ws, r, p, c, i, a, ngx, b, reset, pmdio, spi, force, led, memtest, help *** command status = -1 CFE> help Available commands: x Change extra partitions size find Find string in NAND comp Compare NAND blocks fb Find NAND bad blocks dn Dump NAND contents along with spare area phy Set memory or registers. sm Set memory or registers. dm Dump memory or registers. db Dump bytes. dh Dump half-words. dw Dump words. w Write the whole image start from beginning of the flash e Erase NAND flash ws Write whole image (priviously loaded by kermit or JTAG) to flash . r Run program from flash image or from host depend on [f/h] flag p Print boot line and board parameter info c Change booline parameters i Erase persistent storage data a Change board AFE ID ngx Change Calix board parameters b Change board parameters reset Reset the board pmdio Pseudo MDIO access for external switches. spi Legacy SPI access of external switch. force override chipid check for images. led verify shift-register LED memtest Test memory. help Obtain help for CFE commands For more information about a command, enter 'help command-name' *** command status = 0 CFE> b Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command 844G-1_SG ------ 0 844G-2_SG ------ 1 854G-1_SG ------ 2 854G-2_SG ------ 3 844E-1 ------ 4 844E-2 ------ 5 844GE-1 ------ 6 844GE-2 ------ 7 801GP ------ 8 803GP ------ 9 812G-1 ------ 10 812G-2 ------ 11 813G-1 ------ 12 813G-2 ------ 13 716GE ------ 14 818G ------ 15 Board Id (0-15) : 9 PHY 0 on MAC 0 : link state = Down PHY 0 on MAC 0 : link state = Down PHY 0 on MAC 0 : link state = Down PHY 0 on MAC 0 : link state = Down Number of MAC Addresses (1-32) : 3 Base MAC Address : 44:65:7f:81:xx:xx PSI Size (1-128) KBytes : 64 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Auxillary File System Size Percent: 0 Main Thread Number [0|1] : 0 MC memory allocation (MB) : 4 TM memory allocation (MB) : 20 DHD 0 memory allocation (MB) : 0 DHD 1 memory allocation (MB) : 0 DHD 2 memory allocation (MB) : 0 Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command GPON Serial Number : CXNK0065xxxx GPON Password : Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command WLan Feature : 0x00 Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command NOSLIC -- 0 LE9540 -- 1 LE9541 -- 2 Voice Board Configuration (0-2) : 1 Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command Partition 1 Size (MB) : 0M Partition 2 Size (MB) : 0M Partition 3 Size (MB) : 0M Partition 4 Size (MB) (Data) : 0M *** command status = 0 CFE>